1K User EM 125Khz extendable data backupable Pin code standalone access control

$18.96 Buy It Now or Best Offer
free,30-Day Returns

Seller Store gregzhong
(3275) 100.0%,

Location: HK
Ships to: US,
Item: 226014335447

Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Capacity:1000(extendable up to 16K)
Voltage:12VDC
Verification mode:RF card/password
RF reader extendable:support(1 pcs wg26 reader)
Anti-uninstall:Support
Alarm output:support
Management mode:by Management password or Managment card
Hijacked alarm:support
compatible:can be modified to compatible with HID or Mifare1
permanent Open/Close:support
data backupable:support(you can sync the data from 1 to others)
FCARD:FCARD
MPN:Does not apply

Product Description： Features: Data backup.you can backup all the enrollments data into a memory IC and then restore to other same devices. Delete/Add cards by master card, Anti-probe the password Add ID cards by the room number,such as can name cards to the controller as “201”(201 is a room number),emember the cards but not its real number so that you don’t have to remember all the cards’ number especially when a card lost. 5.Capacity can be extended up to 16K if you need. 6. It has 3 models those are compatible with Mifare1/Hid/EM ,please look the tablet below. Parallel all the models: model FC-198E FC-198E16 Card EM EM User capacity 1000 16,000 All models support: open the door by password, by card + password , manage the device by master card, data backup and restore by memory IC. Extendable Optional:Remote control,RFID reader Card Type: Card type function 1 Common use card 2 Daytime using card,invalid during evening 3 Password attached card,must typing in PW after card reading whenever 4 Password attached during evening.Only card reading is valid during daytime Pin Description and wiring diagram: PIN Symbol Description 1 +12 V DC9-13.8V 2 GND Ground 3 NO normally open of relays, capacity DC10A/30V 4 COM common point of relays, capacity DC10A/30V 5 NC normally close of relays, capacity DC10A/30V 6 OPEN Connect to open switch 7 DOOR Connect to door magnetic sensor 8 ALM Alarm bell output port, current load 100mA 9 WG0 Wiegand 26 reader data lines (data 0),when a reader extended 10 WG1 Wiegand 26 reader data lines (data 1) ,when a reader extended 11 BELL doorbell switch, Operation manual: Function Key Log In 0*password# .Default administrative password:1234 Log off 0*# The functions below should be operated in a Log in status Change password 1*newpassword# (password should be 4~6 bits) Dispatch user PW 2*userpassword#(user password should be 4~6 bits) Delete user PW 3*user password# Delete all user PWs 3*9*9# Dispatch type 1card 4*1# card reading(if more cards,can read card continuously) Dispatch type 2 card 4*2# card reading(if more cards,can read card continuously) Dispatch type 3 card 4*3# card reading(if more cards,can read card continuously) Dispatch type 4 card 4*4# card reading(if more cards,can read card continuously) Dispatch a remote 4*5# pressing any key of the remote,the device beep once means OK. Delete cards 5*card number# (card number is a 10 bits printed on card) Delete all cards 5*9*9# (the device beep once means finished) Delete a card type 6*card type# Delete all cards&PW 6*9*9# Setup to night mode 7*password# Setup to Normal Open 8*password#(conveniently for going to work every morning) Setup open delay 9*seconds# (seconds is a 0~99 digit means the duration of delay) Setup fault PW times 10*fault times#(a 2~9 digit,means fault PW entering times,default is 5) Setup device suspend time 11*suspend time#(1~99 ,means 1~99 seconds,default is 10) Restore the Manufacture setup 12*# Setup stress PW 13*stress PW#(4~6 bit) The functions below should be operated in a normal status PW open PW # Card open Card reading,(if a PW needed,press the PW) On/Off the night mode 7*PW # On/Off NO status 8*PW # Modify the user PW after card reading,press *1* new password# during green light flashing Turn on the Stressing Alarm Stress PW# Turn off the Alarming Read any authorized user card Others press ** anywhen will exit if the operation is right,the buzzer will sounda long beep,if wrong operation,3 short beep. Press and hold the reset button for 1 second,one beep,all the setup will be restore to manufacture default. Press and hold the reset button for 3 seconds,not only restore the manufacture default,but also delete all the data including dispatched cards and PW

Frequently Asked Questions About 1K User EM 125Khz extendable data backupable Pin code standalone access control in My Website

24hournewsupdates.com is the best online shopping platform where you can buy 1K User EM 125Khz extendable data backupable Pin code standalone access control from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 1K User EM 125Khz extendable data backupable Pin code standalone access control on 24hournewsupdates.com?

1K User EM 125Khz extendable data backupable Pin code standalone access control

Frequently Asked Questions About 1K User EM 125Khz extendable data backupable Pin code standalone access control in My Website

What are the best-selling 1K User EM 125Khz extendable data backupable Pin code standalone access control on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply