McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO

McIntosh MC2205 Solid State Amplifier - SERVICED / NEW GLASS / TESTED / DEMO

$3499.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store new_art_repository
(251) 100.0%,

Location: Warren, New Jersey
Ships to: US,
Item: 126720417284

All returns accepted:ReturnsNotAccepted
McIntosh:McIntosh
Type:Power Amplifier
Audio Inputs:Stereo L/R RCA
Number of Channels:2
Number of Inputs:2
Color:Black
McIntosh MC2205:McIntosh MC2205
Country/Region of Manufacture:United States
Power:200 W
Audio Outputs:Raw Cable Speaker Jacks
Number of Outputs:2

This auction is for McIntosh MC2205 Solid State Power Amplifier. This item was professionally serviced by an authorized McIntosh service center (service records and invoice are available), new glass was installed. The unit was tested, see demo / details below. Full demo is included here: DEMO: Full Demo CONDITION REPORT: * Very good used condition – shows some light cosmetic wear associated with use including marks, light scratches. * McIntosh MC2205 Solid State Power Amplifier is functional. * It was recently serviced by an authorized McIntosh service center. Service records/invoice will be made available to the winning bidder. * Chrome parts are very good. * New glass was installed. * The decibels light does not light up. All other lights work. * Please see images / review detailed description / view full video demo for more details. The following basic functionality tests were performed (refer to the demo for specifics) 00:01 – Turning On / Playing Source via Speakers 1 and 2. 00:32 – Adjust L and R channels via separate output level controls. 00:53 – Switching Meter Range (watts, decibels, and hold). 01:42 – Switching speakers off. 01:50 – Showcase L and R channel power meters in dark. SHORT SPECS (FULL SPECIFICATIONS ARE LISTED BELOW) Power output: 200 watts per channel into 8Ω (stereo), 400 watts into 8Ω (mono) Frequency response: 10Hz to 100kHz Total harmonic distortion: 0.1% Damping factor: 16 Input sensitivity: 0.75V Signal to noise ratio: 95dB Speaker load impedance: 1Ω to 8Ω FULL SPECIFICATIONS POWER OUTPUT STEREO 200 watts minimum sine wave continuous average power output, per channel, both channels operating into 1 ohm, 2 ohms, 4 ohms, or 8 ohms load impedance, which is: 14.1 volts RMS across 1 ohm 20.0 volts RMS across 2 ohms 28.3 volts RMS across 4 ohms 40.0 volts RMS across 8 ohms MONO 400 watts minimum sine wave continuous average power output into 0.5 ohm, 1 ohm, 2 ohms, or 4 ohms load impedance, which is: 14.1 volts RMS across 0.5 ohm 20.0 volts RMS across 1 ohm 28.3 volts RMS across 2 ohms 40.0 volts RMS across 4 ohms OUTPUT LOAD IMPEDANCE STEREO STEREO 1 ohm, 2 ohms, 4 ohms, and 8 ohms; separate terminals are provided for each output MONO 0.5 ohm, 1 ohm, 2 ohms, and 4 ohms; obtained by connecting together the appropriate terminals of both channels RATED POWER BAND 20 Hz to 20,000 Hz TOTAL HARMONIC DISTORTION STEREO 0.1% maximum harmonic distortion at any power level from 250 milliwatts to 200 watts per channel from 20 Hz to 20,000 Hz, both channels operating MONO 0.1% maximum harmonic distortion at any power level from 250 milliwatts to 400 watts from 20 Hz to 20,000 Hz INTERMODULATION DISTORTION STEREO 0.1% maximum if instantaneous peak power output is 400 watts or less per channel with both channels operating for any combination of frequencies, 20 Hz to 20,000 Hz MONO 0.1% maximum if instantaneous peak power output is 800 watts or less for any combination of frequencies, 20 Hz to 20,000 Hz FREQUENCY RESPONSE (at one watt output) 20 Hz to 20,000 Hz, +0 -0.25 dB 10 Hz to 100,000 Hz, +0 -3.0 dB NOISE AND HUM 95 dB below rated output RATINGS OUTPUT VOLTAGES 25 volts for distribution lines DAMPING FACTOR STEREO 16 at 1 ohm output, 50 at 2 ohms output, 30 at 4 ohms output, 16 at 8 ohms output MONO 16 at 0.5 ohms, 50 at 1 ohm, 30 at 2 ohms, and 16 at 4 ohms output INPUT IMPEDANCE 100,000 ohms INPUT SENSITIVITY Switchable: 0.75 volt or 2.5 volts — Level control provided for higher input voltages GENERAL INFORMATION POWER REQUIREMENTS 120 volts 50/60 Hz, 70 to 550 watts SEMICONDUCTOR COMPLEMENT 49 silicon transistors 45 silicon rectifiers and diodes 8 integrated circuits MECHANICAL INFORMATION SIZE Front panel measures 16 3/16 inches wide (41.12 cm) by 7 1/8 inches high (18.1 cm). Chassis measures 15 inches wide (38.1 cm) by 6 9/16 inches high (16.67 cm) by 14 1/2 inches deep (36.83 cm), including connectors. Knob clearance required is 1 1/2 inches (3.81 cm) in front of mounting panel. FINISH Front panel is anodized gold and black with special gold/teal nomenclature illumination. Chassis is chrome and black WEIGHT 85 pounds (38.6 kg) net, 102 pounds in shipping carton

Frequently Asked Questions About McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO in My Website

24hournewsupdates.com is the best online shopping platform where you can buy McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO on 24hournewsupdates.com?

McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO

Frequently Asked Questions About McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO in My Website

What are the best-selling McIntosh MC2205 Solid State Amplifier – SERVICED / NEW GLASS / TESTED / DEMO on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply