EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws

$44.99 Buy It Now or Best Offer
free,30-Day Returns

Seller Store thesportingjack
(33486) 99.6%,

Location: Victor, NY
Ships to: US,
Item: 176658157665

Restocking Fee:No
Return shipping will be paid by:Seller
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money Back
Mounting:Dovetail
Mounting Location:Slide
Sport/Activity:Shooting
California Prop 65 Warning:WARNING: This product contains a chemical known to the State of California to cause cancer.” WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.”
Country/Region of Manufacture:United States
Features:Multifunctional
Handedness:Ambidextrous
Item Weight:1.7
Manufacturer Warranty:Lifetime
Set Includes:Screws for mounting
Unit Quantity:1
Unit Type:each
MPN:49311
For Gun Make:GLOCK
Color:Black
Material:Aluminum
EGW:EGW
Type:Pistol Parts
Novak:Novak
For Gun Type:Handgun

Evolution Gun Works Vortex Viper/Venom Novak Sight Mount (fits Burris FastFire and Docter) Includes Mounting Hardware Evolution Gun Works EGW Evolution Gun Works EGW Doctor Mount for Novak Cut Free Shipping Simply remove the rear sight on your gun and replace it with our mount in order to mount your Doctor Mount red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811″ Overall Width: .99″ Dovetail Width: .500″ Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter, ADE RD3-001*, ADE RD3-02*, ADE RD3-009*, UTG Reflex Micro Dot, Sightmark Mini Shot Red Dots, Sightmark Core Shot Red Dots *All ADE mounts require 6-32 x 3/8″ screws. Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins. Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. This mount fits (including but not limited to): CZ 75 Bull Shadow STI with fixed rear sights STI Marauder Christensen Arms 1911 Colt Delta Elite 10mm (2016 and newer) Ruger SR 1911 (fixed rear sight) Sig Sauer Nightmare Citadel 1911s Springfield Armory 1911 EMP – 9mm / .40 Springfield Armory 1911 EMP 4″ Lightweight Champion – 9mm / .40 Springfield Armory 1911 EMP 4″ Conceald Carry Contour Model – 9mm / .40 Springfield Armory 1911 Champion Operator Lightweight – .45 Springfield Armory 1911 Range Officer Compact – 9mm / .45 Springfield Armory 1911 Range Officer Champion – 9mm / .45 Springfield Armory 1911 Range Officer Elite Compact – 9mm / .45 Springfield Armory 1911 Range Officer Elite Champion – 9mm / .45 Springfield Armory 1911 Range Officer Elite Operator – 9mm / .45 Springfield Armory 1911 Loaded (Fixed Rear Sight) – .45 Springfield Armory 1911 TRP Rock Island TCM Rock Standard MS HC Combo – 22TCM/9MMTCM Rock Island TAC Ultra FS Combo – 22TCM/9MMTCM Rock Island Rock Ultra FS Combo – 22TCM/9MMTCM Rock Island TAC Ultra FS HC Combo – 22TCM/9MMTCM Rock Island TAC Ultra MS HC Combo – 22TCM/9MMROCK Rock Island Ultra CS-LTCM Rock Standard FS HC Combo – 22TCM/9MMROCK Rock Island Ultra CCO Rock Island TAC Ultra FS HC – 45 ACP Rock Island TAC Standard FS – 45 ACP Rock Island TAC Ultra FS HC – 9MM Rock Island TAC Ultra FS – 45 ACP Rock Island TAC Ultra CS – 45 ACP Rock Island TAC Ultra CS – 9MM Rock Island TAC Ultra FS – 10MM Rock Island TAC Ultra MS – 10MM Rock Island Rock Standard FS – 45ACP Rock Island M1911-A1 FS Tac Rock Island Rock Ultra CS – 45 ACP Rock Island Rock Ultra CS-L Rock Island Rock Standard MS – 45ACP Rock Island Rock Ultra CCO Rock Island Rock Standard FS – 9MM Rock Island Rock Standard CS – 45 ACP Rock Island Rock Ultra FS – 9MM Rock Island Rock Ultra FS – 10MM Rock Island Rock Standard FS 2-TONE – 45 ACP Rock Island Rock Ultra MS – 10MM Rock Island Rock Standard FS MATTE NICKEL – 45 ACP Rock Island Rock Ultra FS – 40 S&W Rock Island Rock Ultra FS – 45 ACP Rock Island Rock Ultra FS HC – 10MM Rock Island Rock Ultra MS – 45 ACP ATI GSG 1911 .22 ATI GSG 1911 Target ATI GSG 1911 HGA ATI GSG 1911 CA Compliant ATI GSG 1911 ADOP Iver Johnson Hawk 45 Matte Iver Johnson Hawk 45 Matt NS Iver Johnson Hawk 9 Matte Iver Johnson 9 Matte NS Iver Johnson Hawk Polished Iver Johnson Hawk Polished NS Iver Johnson Thrasher Polished 45 Iver Johnson Thrasher Polished 45 NS Iver Johnson Thrasher Polished 9 Iver Johnson Thrasher Polished 9 NS Iver Johnson Thrasher Polished 40 Iver Johnson Thrasher Polished 40 NS Iver Johnson Thrasher CHR45 Iver Johnson Thrasher CHR45 NS Iver Johnson Thrasher CHR9 Iver Johnson Thrasher CHR9 NS Iver Johnson Hawk Digital Navy NS Iver Johnson Hawk O.D. Green Iver Johnson Hawk O.D. Green NS Iver Johnson Hawk Coyote Tan Iver Johnson Hawk Coyote Tan NS Iver Johnson Thrasher SS 45 Iver Johnson Thrasher SS 45 NS Iver Johnson Thrasher SS 9 Wilson Combat Supergrade Commander Special Wilson Combat Tactical Carry Compact Wilson Combat Tactical Supergrade Wilson Combat Tactical Supergrade Compact Wilson Combat Tactical Supergrade Professional Wilson Combat Tactical Carry Wilson Combat Tactical Carry Professional Wilson Combat Tactical Elite Wilson Combat Vickers Elite Wilson Combat Vickers Elite Commander Wilson Combat X-Tac Wilson Combat X-Tac Compact Wilson Combat X-Tac Elite Wilson Combat X-Tac Elite Carry Comp Pro Wilson Combat X-Tac Elite Professional Wilson Combat X-Tac Professional Wilson Combat X-Tac Elite Compact Wilson Combat X-Tac Elite Carry Comp Wilson Combat Protector Wilson Combat CQB Wilson Combat CQB Elite Wilson Combat CQB Tactical LE Wilson Combat CQB Light-Rail Lightweight Wilson Combat Ultralight Carry Wilson Combat Ultralight Carry Commander Wilson Combat Ultralight Carry Professional Wilson Combat Ultralight Carry Compact Wilson Combat Ultralight Carry Sentinel Wilson Combat ULC Commander Compact Wilson Combat Carry Comp Wilson Combat Carry Comp Professional Wilson Combat Hackathorn Special Wilson Combat Hackathorn Special Commander Wilson Combat Tactical Elite Wilson Combat EDC X9 Wilson Combat EDC 9 Compact Wilson Combat EDC 9 Professional Wilson Combat Protect Professional Wilson Combat Elite Professional Wilson Combat Professional Wilson Combat Professional Lightweight Wilson Combat Professional LR-LW Wilson Combat Bill Wilson Carry Wilson Combat Protector Compact Wilson Combat CQB Compact Wilson Combat CQB LR-LW Compact Wilson Combat CQB Commander Wilson Combat CQB Commander Compact Wilson Combat Sentinel Compact Wilson Combat Stealth Wilson Combat MS Sentinel Wilson Combat Sentinel Wilson Combat Sentinel Compact Wilson Combat Sentinel Professional Wilson Combat Super Sentinel Wilson Combat Sentinel XL 1911s have quite a few different dovetail cuts and unfortunately, the industry doesn’t have one or two “standards” when it comes to rear sights. It can be quite confusing when trying to choose the correct rear sight replacement or dovetail mount. It can also be quite difficult when manufacturers use different cuts on the same models, we have seen a few brands use LPA and Bomar cuts depending on when the guns were produced. We have created this chart to help relieve some of the stress involved when choosing the correct dovetail mount. It may be missing some more obscure dovetails, but these are the most common and should be a good starting point. When trying to figure out your dovetail cut, we always recommend measuring for proper fitment. Measuring dovetails is not always the easiest thing. To be measured correctly you need to utilize a set of calipers or micrometers and a set of pins. Measuring point to point on the bottom of the dovetail is not the correct way to measure, but this measurement can give you a rough estimate and should be able to help you find the correct dovetail mount. Novak – One of, if not the most popular dovetail cuts on the market. This is a .495″ width x 65° x .125″ depth. There is a whole lot of information on Novak sights available on their webpage. G.I. – Probably the second most common rear sight cut, if your gun is a G.I. or Government style, chances are you have a G.I. dovetail. Elliason (Gold Cup) – This rear sight cut is not a dovetail like the rest of the cuts on our list. This rear sight cut uses a screw that adjusts the elevation and a pin cross drilled in the front that allows the sight to pivot. We make a specific mount for this application. Newer model Gold Cups use a Bomar style sight cut. LPA – It can be quite difficult to distinguish the difference between the LPA and Bomar cut without measuring or having had a decent amount of experience looking at the sights. They are both popular adjustable style rear sights for the 1911 and are quite common. One of the easiest ways to differentiate between the two is the location of the elevation screw. The Bomar cut has the elevation screw located behind the dovetail cut. The LPA cut has the elevation screw located in the center of the dovetail. An example of the differences is located here. We have also found that some Sig Sauer 1911s use a Kimber Adjustable style cut rather than the LPA cut. If you measure your dimensions here, you should be able to figure out which mount you will require. Bomar – This dovetail cut is very similar to the LPA dovetail cut and that can make it difficult to differentiate between the two. The easiest way to differentiate between the two cuts is by looking at the location of the elevation screw. The Bomar cut has the elevation screw located behind the dovetail cut. The LPA cut has the elevation screw located in the center of the dovetail. An example of the differences is located here. Sig P220 10mm Hunter / P220 Match Elite (we know, not a 1911) – The dovetail on theses 10mm Sigs is different from the other Sig dovetails which is why it was added to this list. While not a 1911, we have had customers have issues trying to find the correct dovetail mount for this gun. Since it is an adjustable style rear sight that is similar to 1911 cuts we figured we would include it here. Remington / Para 10mm Long Slide – The Remington and Para long slide (6″) 1911s use the LPA cut, but our mount would need to be modified to fit with those applications. Instead, we made a specific mount just for those applications. S&W 1911 Fixed – We have found that Smith and Wesson 1911s use a licensed Novak rear sight that has different dimensions than the standard Novak. If you have a S&W 1911 with a fixed rear sight, you will need the specific mount for that application. S&W 1911 Adjustable – Just like the S&W 1911s that use fixed rear sights, we have found that they use a different dimension adjustable rear sight. S&W 1911s with adjustable sights require the use of our specific adjustable mount. Kimber 1911 Fixed – Kimber 1911s with fixed rear sights utlize their own proprietary dovetail cut. Although it looks similar to the Novak, it is not and requires the use of our Kimber Fixed mounting plates. Kimber 1911 Adjustable – Kimber 1911s with adjustable rear sights utilize their own dovetail cut as well. We have found that some Sig Sauer 1911s do use this cut as well. Please note not all parts are “drop in”. As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith. !!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!! No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm. All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues. If you have any questions or Issues, we are here to help. The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business. Thank you for your business-Dave Kravetz

Frequently Asked Questions About EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws in My Website

24hournewsupdates.com is the best online shopping platform where you can buy EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws on 24hournewsupdates.com?

EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws

Frequently Asked Questions About EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws in My Website

What are the best-selling EGW Vortex Viper/Venom Novak Sight Mount Burris FastFire Doctor) w/ screws on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply