1/2" NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve

1/2
1/2
1/2
1/2
1/2
1/2

$65.3 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Centereach, New York, United States
Ships to: US,
Item: 295298293956

eBay Untitled Document Normally Open – Closes when power is applied Gravity Feed Capable – No Minimum Pressure 12 Volt DC Solenoid Valve Function Normally Open Connection 1/2” Inch FNPT Temperature Range 15 to 250° F Pressure Range 0 – 90 PSI (No Min.Pressure) Power Requirements 20 Watts *Suitable Media Water – Air – Gas – *Etc Specifications Body Material Engineered Nylon Plastic (PA66) Components Stainless Steel Seal Material EPDM Operation Type Semi-Direct Coil Connection DIN 43650A Orifice Size 15 mm Cv Value Cv 4.8 (Appx 36 GPM @ 60 PSI) *Duty Cycle 100% but not indefinitely Weight 1.25 lbs Height 4.76″ Length 2.99″ port to port Width 2.68″ The PSL-15K-12VDC is a 12VDC Engineered Nylon Plastic electric solenoid valve. It is a 1/2” valve with NPT ports and a 15mm internal orifice. It is a semi-direct valve operating from a normally open position. It is considered a zero-differential valve as it requires no pressure differential to work properly and can be used in gravity feed applications. This valve is fast acting, opening or closing in less than one second using stainless steel components and an EPDM seal. This is a uni-directional valve with a directional arrow indicating the inlet and outlet port. This cannot operate as a check valve and will not work properly against backflow or backpressure. This valve is fit with a powerful 12 Volt DC coil with a 43650A DIN Connector. The 410 series coil has an H Class Rating which is equivalent to IP65 or NEMA 4 enclosure ratings. This coil is rated for continuous use however, powering it for long periods of time can reduce the life of the coil. This valve should be installed in a well ventilated area allowing airflow to the coil to maximize lifespan. This valve should be mounted coil up when possible and should never be mounted upside down. This valve uses media assistance in conjunction with the coil to open and close properly. Similar to most solenoid valves the diaphragms weep holes need to be kept free of debris. n order to protect this valve and your application from debris a pre-filter is always recommended upstream from your solenoid valve. *Consult a chemical compatibility expert for correct seal and valve body material choice. Listing and template services provided by inkFrog

Frequently Asked Questions About 1/2″ NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve in My Website

24hournewsupdates.com is the best online shopping platform where you can buy 1/2″ NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling 1/2″ NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve on 24hournewsupdates.com?

1/2" NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve

Frequently Asked Questions About 1/2″ NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve in My Website

What are the best-selling 1/2″ NPT 12V DC NORMALLY OPEN Plastic Zero Differential Electric Solenoid Valve on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply