AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800

$549.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: San Juan, Puerto Rico, United States
Ships to: US,
Item: 166813128603

eBay Welcome to the UpBeat Store, your ultimate destination for top-tier automotive aftermarket installations, covering both OEM and aftermarket radios with precision and finesse. With over 12 years of specialized experience, trust us to elevate your driving experience seamlessly. Don’t forget to follow us and visit frequently for the latest deals. Our dedicated customer service team is here to assist you promptly and professionally as we turn your automotive aspirations into reality! This fixed-price listing includes the AudioControl D-4.800 High Power 4 Channel DSP Matrix Amplifier with AccuBASS. AudioControl has paired our award-winning amplifier technology with our powerful Matrix DSP into the D-4.800. This single-unit solution provides unprecedented power and tuning flexibility when you require audio perfection from your factory or aftermarket sound system. The D-4.800 features active speaker level inputs, line-level inputs and outputs plus, using AudioControl’s DM Smart DSP app gives you complete control over all features including 30 bands of equalization, signal delay, input delay, polarity and AudioControl proprietary features like AccuBASS®, GTOTM Signal Sense, and MILCTM plus integrated input and output RTA’s. Perfect for OEM integration and aftermarket builds, the D-4.800 packs power and intelligent flexibility into one beautiful cast aluminum chassis. In The Box D-4.800 Amplifier Speaker and Power Connectors Fuses Manual Warranty Connect your laptop or mobile device to the D-4.800 using AudioControl’s DM Smart DSP app, a fully featured Matrix DSP Interface designed to give you instant and clear control over every aspect of your processor. Route any input to any output, adjust gain, delay and polarity then precisely tune the D-4.800 using a 30 band EQ. High-pass, low-pass and band-pass can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. For OEM integration, take advantage of the input and output RTAs, available for every input and output, to easily identify and sum factory speaker signals. With a clear GUI and intuitive workflow, AudioControl’s DM Smart DSP app will take the guesswork out of tuning your system to your exact specifications. D-4.800 Features Maximum Input Level Control (MILC) The amplifier analyzes the input signal to detect any clipping. If the signal reaches the level of clipping, the MILC Source Clip LED glows red, prompting you to turn down the gain level. When the gain level is maximized, a green Maximized LED will glow to indicate the gain, for that set of channels, is set to the optimum level. GTO (Great Turn On) Signal Sense If you are connecting the amplifier to a factory stereo, or an aftermarket unit without preamp outputs and a remote turn-on lead, the GTO Signal Sense circuitry can turn on the amplifier when an audio signal is detected on either the line-level or speaker-level inputs. After a period of time with no signal input, the amp will turn itself off. ACR-3 Remote The optional AudioControl ACR-3 wired remote is a dual-function remote that lets you adjust both the level of the main and line outputs, as well as recalling memory presets, all from the driver’s seat. The ACR-3 has two LED indicators and a rotary/push-knob. When the blue LED is on, the remote knob raises and lowers the output level. When the knob is pushed in, the red LED will light, allowing the knob to recall memory presets when turned. DM Smart DSP The D-4.800 includes a micro-USB (Type-B) port to connect to a laptop (USB Type-A to micro-B cable included, allowing you to use AudioControl’s DM Smart DSP app. This is a fully featured Matrix DSP interface designed to give you control over every aspect of the processor. Features include routing any input to any output, gain adjustment, delay, polarity, and a 30-band EQ. High-pass, low-pass, and band-pass filtering can be set up for any output using 12 or 24 dB/octave Linkwitz-Riley crossovers. It also includes RTAs (Real Time Analyzer) for every input and output to easily identify and sum factory speaker signals for OEM integration. Top Panel Underneath the removable protective panel are the GTO on/off switch, labeling for all of the input/output connections, and the following LED indicators: Power: If the amp is powering on correctly, this should be lit green. Protection: The amp has built-in diagnostic codes to tell you exactly what is going wrong if the amp detects a problem. Both the Protection and Power LEDs can flash certain codes indicating where the problem is. A chart of these is provided in the Quick-start guide. Communications LED: This LED lights when there is USB activity between the amp and your computer during set up. Maximized Input LEDs: These LEDs illuminate when a maximum audio signal is present on any of the analog audio inputs. Signal levels should be lowered if these LEDs are on a lot. Three LEDs are provided covering: Front High, Front, and Rear. Maximized Output LEDs: These LEDs illuminate when there is maximum signal present on any of the audio outputs. Signal levels should be lowered if these LEDs are on a lot. Two LEDs are provided, one each for Outputs 1/2 and 3/4. MILC Source Clip LED: The MILC (Maximum Input Level Control) level-setting circuit prevents clipping and distortion. It calculates when the waveform of an incoming signal on input 1 or 2 is clipping and lights this LED. The level of the incoming signal should be set just prior to MILC LED coming on. Connections The D-4.800’s connections are aligned along the front of the amplifier for ease of installation. The amp’s connections include: Fuses: Two 40-amp ATO blade-type fuses are installed in the amplifier. Power: Set-screw terminals are provided for connecting +12V Power, Ground, and Remote In. The Power and Ground terminals will accept 8 to 4-gauge wire, while the Remote In terminal accepts up to 6-gauge. An 80A fuse should be placed in-line on the power wire, no more than 18″ from the battery. Line Level Inputs: Two pairs of RCA jacks are provided for connecting the amp to the source unit via RCA cables. Line Level Output: One pair of RCA jacks for feeding the signal to another amplifier. Speaker Level Input: Three sets of removable Phoenix (or Euroblock) connectors are provided for connecting the source unit via speaker-level input. The connectors are labeled Front High (for tweeters), Front, and Rear. ACR-3 Control: This RJ-14 telephone-type connection allows you to plug in the optional ACR-3 Remote. The ACR-3 is used to change the output level and for recalling memory presets. USB: A micro-USB (Type-B) is used for connection to a computer for DSP configuration. Speaker Output: Two removable Phoenix connectors are provided for connecting speaker wire. The amplifier will accept a load impedance of 2Ω or higher in stereo (4Ω or higher when bridged). Option Port: A multi-pin input is used with an optional AC-BT24 Bluetooth module (sold separately). This allows both audio streaming from a Bluetooth enabled device, as well as configuration and control via the DM Smart DSP app. D-4.800 SPECIFICATIONS INPUTS Preamp Inputs: 4 balanced Preamp Input Voltage Range: 250 mV – 8 Vrms Speaker Level Inputs: 6 Speaker Level Input Voltage Range: 3 V – 40 Vrms OUTPUTS Rated Continuous (RMS) Power at 14.4V: 4 Ω – 125 W x 4 RMS 2 Ω – 200 W x 4 RMS Bridged 4 Ω – 400 W RMS Preamp Outputs: 2 Maximum Preamp Output: 8.5 V RMS PERFORMANCE Frequency Response: 20 Hz – 24 kHz Signal to Noise: 102 dBA, Ref 200 W @ 2 Ohm THD+N: < 0.1% Power / Ground Wire Gauge: 8 to 3 AWG wire Fuse Rating: 2 x 40 A WEIGHTS & DIMENSIONS Dimensions: 9.0″W x 8.0″D x 2.1″H Weight: 5.0 lbs. (2.3kg) AudioControl Warranty Policy AudioControl products are designed, engineered, and tested at our facility located in the Pacific Northwest, USA. Given our huge commitment to quality, AudioControl comfortably warranties all materials and workmanship on our products for a period of five years from the date of purchase, provided it is installed by an authorized AudioControl dealer. Should you choose to install it yourself, your warranty is one year from the date of purchase from an authorized AudioControl dealer. A Few Words About Warranties People are scared of warranties. Lots of fine print. Months of waiting around. Well, fear no more, this warranty is designed to make you rave about us to your friends. It’s a warranty that looks out for you and helps you resist the temptation to have your friend, “…who’s good with electronics”, try to repair your AudioControl product. So go ahead, read this warranty, then take a few days to enjoy your new AudioControl processor before registering the warranty card and comments. “Conditional” doesn’t mean anything ominous. The Federal Trade Commission tells all manufacturers to use the term to indicate that certain conditions have to be met before they’ll honor the warranty. If you meet all these conditions, we will warranty all materials and workmanship on your AudioControl product for one year from the date you bought it from an authorized AudioControl dealer (five years if it is installed by an authorized AudioControl dealer). We will fix or replace it, at our option, during that time. Here Are The Conditional Conditions 1. You have to go online and register your AudioControl products. Alternatively, you may fill out the Warranty Registration card that came with your product and mail it to us. 2. You must keep your sales receipt for proof of purchase showing when and from whom the unit was bought. We’re not the only ones who require this, so it’s a good habit to get into with any major purchase. 3. Your AudioControl products must have originally been purchased from an authorized AudioControl dealer. You do not have to be the original owner, but you do need a copy of the original sales slip. 4. You cannot let anybody who isn’t: (A) the AudioControl factory; (B) somebody authorized in writing by AudioControl to service your product. If anyone other than (A) or (B) messes with your AudioControl product, that voids your warranty. 5. The warranty is also void if the serial number is altered or removed, or if your AudioControl component has been used improperly. Now that sounds like a big loophole, but here is all we mean by it. Unwarranted abuse is: (A) physical damage (don’t use it to level your RV); (B) improper connections (120 volts AC into a 12-volt DC power jack can fry the poor thing); (C) sadistic things (your imagination is best kept private). This is the best product we know how to build, but if you mount it to the front bumper of your car or use it as a counterweight for your daughter’s trebuchet project, something will go wrong. 6. If an authorized United States AudioControl dealer installs your component, the warranty is five years. Assuming you conform to 1 through 6, and it really isn’t all that hard to do, we get the option of fixing your old unit or replacing it with a new one. To initiate a warranty claim, please contact AudioControl and we will issue an RA (Return Authorization) number and provide shipping instructions. Products received at AudioControl without an RA number will be refused. Legalese Section This is the only warranty given by AudioControl. This warranty gives you specific legal rights that vary from state to state. Pomises of how well your AudioControl component will perform are not implied by this warranty. Other than what we have covered in this warranty, we have no obligation, express or implied. Also, we will not be obligated for direct or indirect consequential damage to your system caused by hooking up your AudioControl component. Failure to properly register your AudioControl warranty may negate any service claims. Additional Notes We recommend having a professional certified technician handle the installation. For any questions or concerns about the product, please contact us through the "Contact Seller" feature for technical support or customer assistance.

Frequently Asked Questions About AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800 in My Website

24hournewsupdates.com is the best online shopping platform where you can buy AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800 from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800 on 24hournewsupdates.com?

AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800

Frequently Asked Questions About AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800 in My Website

What are the best-selling AudioControl 4-Channel Amplifier 800W Built-in Matrix DSP & AccuBass D-4.800 on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply