For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut

$27.14 Buy It Now or Best Offer
free,30-Day Returns

Seller Store
() %,

Location: Ontario, California, United States
Ships to: US,
Item: 224441891246

eBay Fits Vehicles of the Following Years and Make: 2008-2009 Buick Allure 2008-2009 Buick LaCrosse Hood lift support Item Description: Vehicle Location : Hood Set Quantity: 2 Pcs Extended Length [in] : 21.38″ Compressed Length [in] : 15″ Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes Twin Tube internal construction-Premium gas-charged cylinders Direct fit,Ensures easy installation and precise operation Individually tested for performance and reliability Brand new and warranty offered!! For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut Fits Vehicles of the Following Years and Make: 2008-2009 Buick Allure 2008-2009 Buick LaCrosse Hood lift support Item Description: Vehicle Location : Hood Set Quantity: 2 Pcs Extended Length [in] : 21.38″ Compressed Length [in] : 15″ Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes Twin Tube internal construction-Premium gas-charged cylinders Direct fit,Ensures easy installation and precise operation Individually tested for performance and reliability Brand new and warranty offered!! How to Install : Important Notes about Lift Supports : Use Safety stands whenever a procedure requires you under the vehicle or supports. It is best for two people to assist in the replacement and one to help to avoid p”ing when replacing. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended Length. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8″,then pull the support away from the vehicle and it will release. Lift Supports need to be installed fully 4.extended. In most cases you just can’t compress them unless they are on the vehicle. The support rod piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning function.　 The hydraulic support bar should not be subjected to tilt force or lateral force during work. It should not be used as a handrail. If you have any issues during the installation PLEASE contact us. Never force a support. Item Specifics Brand Autopartsclub2018 Manufacturer Part Number AP116640C01 Manufacturer Warranty 5 Years Placement on Vehicle Left,Right,Front Installation position Hood Other Part Number 25885395,766005,SG230123Gas Spring Damper Extended Length 21.38″ Compressed Length 15″ Material Steel Kit or Single Part Kit Modified Item NO Superseded Part Number 25885395,766005,SG230123Strut Gas Spring Shock Interchange Part Number 25885395,766005,SG230123 Type Struts Fitment Type Direct Replacement Custom Bundle Yes Mounting Hardware Included No Force Newtons 460N Superseded Part Number 25885395,766005,SG230123Strut Gas Spring Shock Interchange Part Number 25885395,766005,SG230123 Type Struts Fitment Type Direct Replacement Custom Bundle Yes Mounting Hardware Included No Mounting Hardware Included No Payment We accept paypal only We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! Shipping 1. Items will be shipped within 24 hours after getting your verified payment. US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven’t receive the item after the estimated shipping tim Returns 1.Defective products can be exchanged or returned for full price refund within 30days after you receive the item. 2.Any returning or exchanging item must be in new condition and cannot be tempered. 3. Buyers are responsible to pay the return shipping fee or exchange shipping fee. 4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don’t need now ,you also can often come to visit my store, maybe one day you can buy the items in our stores which you need. Contact Us We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays) Every week we have new items put on sale , if the items you don’t need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need. Hot Item For 2001-2006 GMC Yukon 13Pcs Front Upper Control Arms Idler Arm Tie Rods Kit USD 108.99 Heavy Duty Coil Spring Compressor Strut Remover Installer Suspension Tool 2pc USD 29.89 Chrome Rear Bumper For 2014-2018 Chevy Silverado GMC Sierra 1500 w/ Conner Steps USD 159.99 12Pcs Front Lower Control Arm Ball Joint Tie Rod Fits 2003-2008 Toyota Corolla USD 88.34 30 Amp RV Female Plug Replacement Receptacle Plug Male Power Cord Grip Handle USD 9.99 Picture For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut Fits Vehicles of the Following Years and Make: 2008-2009 Buick Allure 2008-2009 Buick LaCrosse Hood lift support Item Description: Vehicle Location : Hood Set Quantity: 2 Pcs Extended Length [in] : 21.38″ Compressed Length [in] : 15″ Patented Multi-Lobe Seal makes gas spring more tolerant to vibration and temperature extremes Twin Tube internal construction-Premium gas-charged cylinders Direct fit,Ensures easy installation and precise operation Individually tested for performance and reliability Brand new and warranty offered!! How to Install : Important Notes about Lift Supports : Use Safety stands whenever a procedure requires you under the vehicle or supports. It is best for two people to assist in the replacement and one to help to avoid p”ing when replacing. Before removing the old lift support,inspect the end connections and compare them to the units on your vehicle to make sure that they are the same As well as the extended Length. Remove the old support from the vehicle by placing a small flat headed screw driver under the U shaped band on the ends of the support. Slowly turn the screw driver and it will lift up on the band approx.1/8″,then pull the support away from the vehicle and it will release. Lift Supports need to be installed fully 4.extended. In most cases you just can’t compress them unless they are on the vehicle. The support rod piston rod must be installed in a downward position, not upside down, so as to reduce friction and ensure the best damping quality and cushioning function.　 The hydraulic support bar should not be subjected to tilt force or lateral force during work. It should not be used as a handrail. If you have any issues during the installation PLEASE contact us. Never force a support. PaymentShippingReturnsContact Us We accept paypal only We only ship to verified PayPal addresses. Please make sure your PayPal address is verified and up to date before sending payment. We cannot change any address after checkout has been completed. Please make sure you submit your correct address! 1. Items will be shipped within 24 hours after getting your verified payment. US Storage& UNITED STATES by fast shipping.We offer 24 hours dispatch and estimated delivery time is 3-5 business days.except weekend and other irresistible factors.Please feel free to contact us if you haven’t receive the item after the estimated shipping tim 1.Defective products can be exchanged or returned for full price refund within 30days after you receive the item. 2.Any returning or exchanging item must be in new condition and cannot be tempered. 3. Buyers are responsible to pay the return shipping fee or exchange shipping fee. 4.Please contact us by eBay email first before you return the item Every week we have new items put on sale , if the items you don’t need now ,you also can often come to visit my store, maybe one day you can buy the items in our stores which you need. We treat each buyer with a sincere heart, I believe our sincere service , excellent quality of goods will win your trust and support, you may contact us via message and we will reply to you within 24 hours from Monday to Saturday.(Excluding local holidays) Every week we have new items put on sale , if the items you don’t need now ,you also cam often come to visit my store, maybe one day you can buy the items in our stores which you need. All rights reserved.

Frequently Asked Questions About For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut in My Website

24hournewsupdates.com is the best online shopping platform where you can buy For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut on 24hournewsupdates.com?

For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut

Frequently Asked Questions About For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut in My Website

What are the best-selling For 2008-2009 Buick Allure Buick LaCrosse Qty2 Hood Front Lift Supports Strut on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply