Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier

Inlay Blank - Mother of Pearl 1.25mm - 50mm x 30mm - For Guitar/Luthier

$19.32 Buy It Now or Best Offer
free,30-Day Returns

Seller Store luthierssupplies
(10891) 99.8%,

Location: Mount Tamborine, Queensland
Ships to: US,
Item: 256543766314

Return shipping will be paid by:Buyer
Returns Accepted:Returns Accepted
Item must be returned within:30 Days
Instrument:Guitar
Australian Luthiers Supplies:Australian Luthiers Supplies
MPN:Does Not Apply
Suitable For:Acoustic Electric Guitar,Acoustic Guitar,Bass Guitar,Cigar Box Guitar,Classical Guitar,Electric Guitar

Mother of Pearl blank for cutting custom inlays – 1.25mm (0.050″) thick – 50mm x 30mm – approximately 1/5 ounce – Premium quality – Natural shell White Mother of Pearl is the most common inlay material for the fingerboards of guitars and other stringed instruments. It has a white or light silver colour with a natural iridescence and a subtle beauty. 1.25mm thick stock is good for both fingerboard and headstock inlays. Thicker material is better for fingerboard inlays as the radius of the fingerboard will not make the edges too thin. The blanks can be cut to shape using a jewellers saw. The inlays should be installed into a cavity made by routing or chiseling. Always wear a dust mask when sanding and cutting pearl as the dust may be hazardous if inhaled. White Mother of Pearl blank to cut custom fingerboards and headstock inlays. The best way to cut these blanks into inlays is using a jewellers saw. The blades in these saws are much finer than any other saw and will cut the shell without breaking it and leave a clean edge that needs little smoothing out. A cavity needs to be made in the timber for the inlays to be installed in. The best way to create this is with a Dremel router and small downcut bit. If a Dremel isn’t available the cavity can be made with a small sharp chisel. The inlays should be set in using epoxy with some sanding dust mixed into it. The sanding dust should be the from the timber being inlaid. Once the epoxy has dried level the inlay to the timber using a hard sanding block or fingerboard radius block with sandpaper attached with double-sided tape. This hard block will help keep the surface level.

Frequently Asked Questions About Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier in My Website

24hournewsupdates.com is the best online shopping platform where you can buy Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier on 24hournewsupdates.com?

Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier

Frequently Asked Questions About Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier in My Website

What are the best-selling Inlay Blank – Mother of Pearl 1.25mm – 50mm x 30mm – For Guitar/Luthier on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply