Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit

$29.95 Buy It Now or Best Offer
free,30-Day Returns

Seller Store method2kh
(6500) 100.0%,

Location: Central Islip, New York
Ships to: US,
Item: 165356159526

Restocking Fee:No
Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:30 Days
Refund will be given as:Money back or replacement (buyer’s choice)
Generic:Generic
Type:Clock Fix,Controller Board Replacement,Custom LED Color,4.5MM Gamebit
Compatible Model:Nintendo GameCube
Compatible Product:Controller

Product Details:This is a direct replacement for your GameCube’s controller PBC board.It contains pre-installed: a custom LED color of your choice, a battery holder for easy battery replacement down the line, a brand new Panasonic CR2032 battery, and a 4.5MM Gamebit screwdriver bit to open up your GameCube.This is an easy install, although it helps to be technically savvy. Down below are detailed notes, please read everything carefully if you are not familiar with installing these boards.If you do not contact me with an LED color choice, or write it in the notes during checkout, a stock orange LED will be given.Battery:This will contain pre-soldered a brand new CR2032 battery holder, and a replacement Panasonic CR2032 battery. The original battery is soldered in, so this will make replacing the battery in the future much easier.The battery packaging may be different than the photos. It will still be genuine Panasonic and sealed. LED:I have the following colors in stock: Red/Orange/Yellow/Green/Blue/White/Pink/Purple(UV)/Chartreuse/Warm-white/Slow Cycling RGB. (please message me your choice or write it in a message during checkout)These are 5MM and look fantastic in the GameCube. The original LED size is 3MM, so these are brighter. I did notice that the UV one is somewhat dim.4.5MM Gamebit / Assembly:This will include a 4.5MM Gamebit security screwdriver bit to open up your GameCube. When you put back the top of the case, YOU MUST keep the disc tray open or else you WILL destroy the legs of the eject mechanism that is attached to the DVD drive. This is why that board is so expensive, it is not repairable if those legs are destroyed, and the only reason why those legs break is because the person did not keep the disc tray open when putting back the top of the case!Be very careful when removing the ribbon cable on the PCB board, ESPECIALLY when putting it back into the GameCube motherboard. There are these silver pins on the ribbon that you can fray and destroy if you insert this ribbon incorrectly/at an angle. When inserting it back in, notice a small crease on the end of the ribbon, bend that to a 90 degree angle, then put your finger on top of the bend, position the ribbon, and press down gently. This is really about technique, so take your time.When putting back the 4.5MM case screws DO NOT re-thread the screws! What this means is that if the screw does not easily go in, you must remove it and try again. You can snap the legs inside the GameCube case if you re-thread the screws. Hint! Go counterclockwise when screwing in screws until you feel a slight CLICK. Once you feel that click, screw clockwise, the screw should be in position. Never use power tools. Shipping: Location Service 1st Item Additional USA USPS Ground Advantage Free Free USA USPS Priority $7 Free USA USPS Express $25 Free Insurance:Insurance is included on all purchases, protecting against loss or damage during transit. If you would like signature confirmation, it is an additional $2.65. If your package is stolen once delivered, USPS nor myself are responsible. If the order has a total cost (including shipping costs and any taxes) of $750 or more, the seller is required to purchase signature confirmation.Please contact me prior to your purchase if you are interested in this service. Return Policy:All items are guaranteed against D.O.A. (dead/defective on arrival). If by chance your item is non-functional upon arriving, or not as described in the ad, a refund will be given up to 30 days of ad closing.Refunds will only be granted based upon this criteria. Buyer must pay for return shipment, and actual shipping costs will be deducted from the refund as well. Item must be returned in original condition complete with all material. International Buyers:Please note that customs duties and taxes are solely the responsibility of the buyer. In addition, the time frame in which an international package takes to arrive might fluctuate based on it’s clearance through customs. The USPS, eBay, or myself have no control over this aspect and will not be held responsible. For any further inquiries, feel more than free to contact me 24/7!!!Thanks for looking & have a great day!!

Frequently Asked Questions About Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit in My Website

24hournewsupdates.com is the best online shopping platform where you can buy Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit on 24hournewsupdates.com?

Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit

Frequently Asked Questions About Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit in My Website

What are the best-selling Nintendo GameCube Controller Board PCB w Battery Holder+CR2032+LED+4.5MM Gamebit on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply