Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic

$879.0 Buy It Now or Best Offer
free,30-Day Returns

Seller Store susannetrek
(2968) 99.3%,

Location: Brooksville, Florida
Ships to: US,
Item: 235724433739

Return shipping will be paid by:Buyer
All returns accepted:Returns Accepted
Item must be returned within:14 Days
Refund will be given as:Money Back
jonpaultrek2012:jonpaultrek2012
Convention/Event:New York Comic Con
Type:Phaser
Character:Captain Kirk
Signed:No
Series/Movie:The Original Series
Genre:Science Fiction & Horror
Franchise:Star Trek
Country/Region of Manufacture:United States
Vintage:No

Star Trek TOS Laser PhaserBlack and White Man-Trap Episode style with RED beam ! Laser Modified P2 Hero Phaser Oclaro 1.0 Watt nominal Red 12mm module, G2-DTR Lens, X-Drive, 2 amp 8-volt power system. It would be best if you were in a mostly dark place to see the beam and this beam does not burn stuff.All metal fittings Hybrid Hero-Midgrade Style, Black & White, Integral nozzle, and heat sink custom crafted. All metal trims on P1/P2 that “separate” for screen accuracy!I ship what you see in the photos: I invented and prototyped the first Star Trek Laser Phasers in 2012 and currently manufacture all the metal parts that are seen on this tricked-out beauty. It has been a while since I had built some. I took a long break after knocking out several hundred of these over the years so get em while I got em, the holidays are around the corner.P1 and P2 Phaser set recreating the 1966 Black & White style I air-brushed the off-white (putty?) handle to match the “Mantrap” episode “looks”. The last photo is a beam shot of this red laser module installed in a 3′-0″ long Enterprise model.SHIPS WITH HIDDEN ANTI-TAMPER SEAL, IF YOU OPEN THE PHASER YOU OWN IT SO, IN THIS CASE, DO NOT TRY TO USE THE 14 DAY RETURN OPTION.Two rechargeable 3.7 Volt 2000 mAh LiOn batteries and battery storage case, are both included.I suggest you order rechargeable batteries and a charger. The Phaser ships with partially charged batteries but getting some fresh batteries and a charger is a good idea: CLICK FOR BATTERIES AND CHARGERCustom Crafted AAAA quality custom brass and acrylic Display Stand inspired by Spock’s favorite game “Tri-Dimensional-Chess”. Not a plastic or knock-down stand, but entirely handcrafted from 1” thick solid- acrylic & ¼” diameter solid-aluminum rod with diamond polished finish on the edges of the acrylic plinth. Phaser is provided in a 10” square corrugated cardboard Storage-Box. Very sexy and screen accurate: This P1 is removable and makes the B&W TV sound and faux-emitter lights with an LED. P1 buttons are static BUT were removed from a Wand Co. Glow-Rock Phaser and are very nice.P1 flip-up acrylic sight is fixed in a partial open position (see photos)All metal trim everywhere, THE BLACK PAINTED FIXED ASPIRATOR IS BRASS!!; Aluminum Nozzle, Aluminum Hand Crafted side-turn dial, Aluminum custom turned top-turn dial, Aluminum trigger assembly, P1 brass release in MIRROR polished finish, P1 emitter brass in mirror polish, P1 dorsal button is black, P1 static coin-edge thumbwheel in hand turned Aluminum, mirror polished aluminum lock-plate, the handle has brass bottom plate and mirror polished brass screws holding it onto the handle bottom.The Mid-Grade style fins are machined aluminum and silver-tipped. Very Pretty Oclaro-X driven 1.0 watt nominal, @ 638 nm RED color laser (visible indoors and, outside at dusk/dawn/bright-at-night). This is not a cutting or soldering tool. This is a Prop with a neat looking beam. If you want something for selfdefense, go to a GunShow. The laser module power is the rated power on a Test-Stand with a dedicated 7.4 volt power supply and metered to a professional grade (thousands of dollars cost) laser meter. Not some $29 laser pocket laser meter. If you do not like the prop you have a 14 Day return option BUT you will not be reimbursed for any “pack/handle/ship costs” and there will be a $29 total deduction from all refunds.Integrated custom machined spinner Hero Nozzle acts as exposed heat dissipator while copper laser-heat sinks remain hidden from view.Fixed DTR-G2 aspheric coated Lens to max out power turning the 700mw diode into a near 1.0 watt beauty.DTR’s G2 coated high power Laser Optics!!; Not just any laser optics in this unit. I invest the extra $$ and get the “DTR Brand G2” (coated Aspheric Optic System) that has the best performance of any Optics System for a 638 nm laser such as this.The beam is very pretty, it will not burn stuff.All solid copper Laser diode modules are set secure with setscrew in the heat dissipator assemblies.Thermal Conduction: My 6063 alloy is rated at 210 W/m*K 15% higher than 6064/6262 (higher is better for Laser applications). 6064 (also known as 6262) is great for anodizing but has a lower thermal conduction rating of 172 W/m*K. My one part integral nozzle and heat sink designs are the most efficient combined heat-sink & heat-dissipator on the market for a Phaser. Dimensions of P1/P2 Phaser Assembly (screen accurate approximately); 8 1/2” wide x 6 1/4” tall x 2 1/8” deep or about , 22.0 cm x 12.0 cm x 5.5 cm. Screen accurate size. Dimensions of Stand (approximately); 3” x3” x1” thick, ¼” aluminum arm about 6-1/2” high. Laser Firing Time; I have never burned out a 1 watt nominal with this integral nozzle/dissipator & heat-sink. I found firing can be quite long, 30 minutes of on/off use has not been a problem (assuming you don’t run the batteries out). Multiple long fires of 1 minute has also not been an issue. Keep in mind you can always feel the external aluminum nozzle/heat-dissipator to see if things are heating-up. A hot dissipator may be a cue for a minute long rest… Phaser Finished: in automotive grade black & custom paint. General Construction: This is build using a licensed Lexan (polycarbonate) Phaser shell and a modified licensed soundboard for non-laser FX light & FX sound effects. Warranty & Service InformationContact me with your questions and concerns. 14 DAY RETURNS OK FOR UNUSED ITEMS ONLY, do not open the Phaser and break the anti-tamper seal or the 14 day return option will not be honored. Terms of Sale:Batteries included for locations in the USA only. Generally speaking, Customs does not allow ‘Lithium’ based batteries to cross international borders.This Laser, aka prop-Phaser, was hobby-built and sold solely as a component for incorporation into Your end-products or Your theater-productions, cosplay events, and Trek fan movie events.Not cdrmaker1 Do not place the laser prop in the; nose, ear, mouth, or bum. Do not try burning off freckles, as this may cause discomfort. Failure to follow these instructions may cause; sneezing, watery eyes, dry mouth, constipation, diarrhea, depression or maybe, alotta of excitement, do not eat Phaser and pass Phaser as it may hurt. Also, your part will get covered in poopy. Remember never put any prop part up-your-bum, unless I tell you to do so. -No international sales to; Klingon Empire, the Russian Federation or Columbia. Star Trek TOS Phaser Real 185mw Blue Laser Gun With Metal Parts sdrmaker1

Frequently Asked Questions About Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic in My Website

24hournewsupdates.com is the best online shopping platform where you can buy Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic from renowned brand(s). 24hournewsupdates.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

What are the best-selling Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic on 24hournewsupdates.com?

Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic

Frequently Asked Questions About Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic in My Website

What are the best-selling Star Trek TOS Phaser 1000mw Red Laser, Aluminum, Acrylic, Brass, painted plastic on 24hournewsupdates.com?

No Responses

Leave a Reply Cancel reply